 |
 |

|
 |
 |
 |
 |
 |
HASLER TELEX UNIT
|
|
The Ascom Telex
Unit is the Hasler Telex Unit. The Ascom Telex Unit is a direct interface which
can connect your computer system to the worldwide telex network of over 1.5
million users. Any computer with an RS232C connection is capable of linking the
telex network to your desk. In conjunction with the Ascom Telex Unit your
familiar, existing computer equipment can be used to prepare, send and receive
telexes. Telex management software is available for all major types of host
computer, from PCs right up to mainframes. The Ascom Telex Unit is PTT approved
for connection to telex networks in over 45 countries around the world.
The Ascom Telex Unit provides a comprehensive range of functions:
- Automatic dialling and redialling with full answerback checking.
- Automatic retries on call failure or on receipt of a service signal from
the telex exchange.
- Automatic reception of incoming calls and routing to host machine or
separate printer.
- Simple host protocol allows full monitoring of message status.
- Full conversational working available.
- Telex Line connection meets all major international requirements.
The Ascom Telex Unit is an intelligent modem which provides an interface
between a host computer and a telex line. It has been designed for ease of
operation and connection to any computer which has RS232C capability. The Ascom
Telex Unit is very reliable, and because by design it is interactive with the
host computer, it has a greater flexibility of operation, than that which can be
achieved by "store and forward" devices. The same host protocol is
used for Ascom Telex Units worldwide. Host computers on which the Ascom Telex
Unit has been implemented include: IBM PC/XT/AT/PS2 and compatibles, Data
General, DEC (PDPs and VAX), HP3000, ICL, NCR, WANG and IBM 3x/AS4OO range and
many more. Versions of the Telex Unit are available around the world, making it
especially suitable for multinational Companies to use in various locations with
complete confidence. The best testimony to the Ascom Telex Unit is the large
number of computer Companies that use it as an integral part of their own
products - and, of course, the installed base of over 25,000 units worldwide. |
| TECHNICAL SUMMARY |
|
HOST CONNECTION
Telex calls are initiated by a simple dial command followed by the required
telex number and optional expected answerback. On connection, the host sends the
message text and the call is progressed by the unit. On completion, the host is
advised of a good call and confirmation of received answerbacks is given. Should
a call fail for any reason, the host is advised immediately and has the option
to make a second attempt or to try a new call. The host is regularly polled by
the Telex Unit to ensure security. If the host is unable to process telexes, the
incoming line can be blocked or routed to a printer for hard copy. If the Hasler
1010 Baudot Monitor Printer is connected to the Telex Unit, all incoming and
outgoing telexes are printed as they occur plus any service signals received.
The system may be configured to print incoming telexes if the host is powered
off.
COPE CONVERSION
The Ascom Telex Unit converts ASCII to the telex character set (Baudot) and
vice versa, Lower case is converted to upper case. Any non-convertible
characters are transmitted as a question mark.
CALL FAILURE
Should a telex not be successfully sent, the Telex Unit transmits the reason
for the call failure to the host together with a call failure code. The
automatic retry pattern varies depending on the call failure code.
HOST INTERFACE
- 25 Way 'D' Type RS232C/V24 connection.
- ENQ/ACK or DTR/DSR status check (switch selectable).
- XON/XOFF or DTR/DSR flow control (switch selectable).
- 9600,4800, 2400, 1200, 600 or 300 Baud (switch selectable).
- 1 start bit, 7 data bits, 1 parity bit, 2 stop bits.
- Automatic code conversion between ASCII and Baudot.
- Mainframe protocols are available, including IBM 2780 and Burroughs Poll
Select.
TELEX LINE INTERFACES AVAILABLE
- SCVF-V21/R20.
- Double Current.
- Single Current.
- SCVF-ED1000.
- SCVF-Bell 108.
Signalling meets the requirements of the relevant country,
GENERAL
Power Supply: Mains voltage to country requirement. 50-60 Hz. Power
Consumption: 30 VA max. Operating Environment: 0°C to 40°C. Dimensions:
216mm wide, 235mm deep, 62mm high.
Specifications may vary according to country of operation. | |
|
|
Vasira, Inc., P.O.
Box 1197, Denville, NJ 07834 Phone 973-663 2515 Fax 973-663-5604
E-mail: info@vasira.com

This
web site was created by E-mark online | |
 |
 |
Telex,Telex, fax, fax, facsimile, facsimile,
communications, telecommunications, computer, consulting,security, encryption,
authentication, algorithm, DES, data, voice, fax, Internet, e-mail, electronic,
mail, facsimile, firewall, server, network, LAN, WAN, X.25, frame, relay, remote
access, T1, telephony, infosecurity, virus, Ascom, Ascom, Ascom Cerberus,
Cylink, Gretacoder Data Systems, Leemah Datacom, Racal, Security Dynamics,
Security Dynamics, Security Dynamics, Jones, Futurex, Rightfax, Rightfax,
Rightfax, Rightfax, Rightfax, Rightfax, Rightfax, Rightfax, Omtool, Omtool,
Omtool, Hasler, Hasler, Hasler, Hasler, Hasler, HTU, HFU, Gretacoder, Traqnet,
Novacom, GEE, ATIR, DDD, DID, Direct Inward Dialing, DTMF, Dual Tone,
Multi-Frequency, Brooktrout, Trufax, SafeConnect, InfoCard, InfoKey, LanReach,
Bandwagon, Gammalink, packet, filtering, TCP/IP, Western Datacom, Cryptocom,
Semaphore, Semaphore, Cray, Cray, Cray, Cray Communications, cryptography,
digital signatures, X.509, Windows NT, Sentry, protection, public key, private
key, secure, Safe, Vault, encryption, encryption, encryption,
encryption,encryption, telex, telex, telex, telex, telex, fax, fax, fax, fax,
fax, security, security, security, security, security, security, security,
security , security, network fax, network fax, fax server, fax server, fax,
server, fax server, fax server, fax server, fax software, fax software, fax
software, fax software, encryption, encryption, encryption, frame relay, frame
relay, frame relay, frame relay, frame relay, frame relay, frame relay.